Skip to content Skip to sidebar Skip to footer

How Long Does {WINDOW TINTING} Take To Cure

How Long Does WINDOW TINTING Take To Cure

How long does window tinting take to cure - Window tint curing, or drying, generally takes a week, but can take as long as a month in rare cases. You should avoid excessively touching or cleaning the window film surface for the first 48 hours after install. This process takes less than a day, but the window tint needs time to cure. Curing can take approximately three days in ideal weather conditions, so you will need to avoid rolling the windows up or down during this time.

But once the curing is complete, these imperfections will completely disappear. Curing is something that often varies. It can take anything from 3 to 30 days as it depends on the weather, the amount of sunlight the window is receiving, humidity. Ideally, window tint should be installed during the summer months under sunny weather, since it gives the tint a better chance to dry quickly, or at least in a temperature controlled tint shop. Under these circumstances, it usually takes two to three days to completely cure.

We suggest allowing thirty days for the film to fully dry and cure. During this curing process, it is normal to have small water bubbles and/or a hazy appearance. These will disappear as the film dries; depending upon the film type and weather conditions. The amount of time before your new tint will be totally dry is determined by the amount of sunlight it gets. If it's cloudy and overcast outside, it will take longer, if it's hot and sunny, then the film dries very quickly. This time frame can range from 2 days, up to 1 month.

A lot has to do with the brand and quality of film they used. We tint a ton of cars in michigan. In the summer you are good after 2 days in the sun. winter - 3 to 5 for sure. 3M will take a good 2-3 weeks to completely dry. Johnson Window Film is good in about a week, but then again. It all depends on the type of film made by the manufacturers.

With our standard window films, we have noticed that our curing periods will range from 2 weeks to 30 days. The amount of time before your new tint will be totally dry is determined by the amount of sunlight it gets. If it's cloudy and overcast outside, it will take longer, if it's hot and sunny, then the film dries very quickly.

Wouldn't advise it. Adding heat to them can cause the tint to wrinkle and bubble, and that would look bad, plus ruin your tint job and waste money. Either ride with the air conditioning on, or don't ride if you think its too hot. Always Cool Window Tint recommends keeping your windows closed for 3- 5 days. In colder weather, it takes longer for the windows to cure. Depending on how cold the temperature, 3-5 days should be ample time for the film to dry.

Brand-new tinted windows might provide instant benefits, but the adhesive that sticks the film to the glass doesn’t cure immediately. It can take anywhere from two to four days to set, and if you roll your windows down before then the tint may peel. DON’T worry about hazy film or water pockets. How long should I keep my windows rolled up after I have window tint installed? We recommend keeping your windows up for at least 2-4 days. If windows are rolled down before that time frame the tint often peels off because it has not had enough time to cure.

Yes. As long as it is factory window tint, we can install window film directly on the glass. Factory window tint’s color is actually a pigment in the glass. Aftermarket window film also has many more solar benefits than factory window tint. Factory tint only rejects part of the UV rays, and only rejects a small amount of heat.

Real residential and commercial window tinting usually takes up to 40 days to completely cure to the glass depending on the weather. By comparison automotive film only takes a few days. In this time you will see what looks like bubbles form in the film. This is just the water remaining after application and will dry out over time.

How long does the window tinting process take? Installation typically ranges from 1 to 4 hours, depending on the vehicle type and how many windows are involved. Also, if your car already has window film that will need to be removed, that will add at least 2 hours to the process. But of course, time estimates are just that—estimates. We recommend leaving your windows up for 2-3 days. This allows time for the film to bond with the glass. If you dont allow this time, the movement from the glass may cause the film to begin peeling. However, for the film to fully cure, it may take a few weeks.