-->
Skip to content Skip to sidebar Skip to footer

Window Tint Percentage Examples

Window Tint Percentage Examples. This is a noticeably dark tint on a vehicle. Example of Tint Darkness Percentages Choosing your car window tint darkness is mainly about following the law. As you may already know tinting film darkness is measured in VLT (Visible Light Transmission), and the numbers represent the percentage of light that comes through the windows. For example, 40% VLT window film would block 60% of light through the window and allow 40% to pass through.

Car Window Tint Percentage Examples
Car Window Tint Percentage Examples (Dominic Stevens)
Every state has different legislation regarding tint darkness and reflection and you always want to avoid getting fined because you used tint which was too dark. The lower the VLT percentage, the darker the tint will appear. As mentioned earlier, some states limit the tint percentage for vehicles. Once you pick the type of window tint, the tint percentage, and other custom factors, the installer will begin the process by prepping the windows that will be applied.

Window Tint Percentages Examples So far, we have so many types of window tints, and the percentages can range from 10% to 90%. But keep in mind that it is not allowed to tint your windows 5%, as this is against the law. However, if you want a low tint (5%), then there would be some exceptions. Window Tint Percentage Examples 50%. If you don’t want darkness, then 50% color is the right choice for you. It only blocks half of the light from entering your car, but it is still useful in preventing heat and ultraviolet rays. It also helps reduce glare and eye strain, thereby making driving safer.

VLT numbers represent the percentage of light that comes through the windows. For example, 40% VLT window film would block 60% of light through the window and allow 40% to pass through. In a majority of cases you do not need more than 50% VLT for the tint. We have prepared a simple example image for you to figure out how much light passes through different percentages of tint: Background photos credit: Krystina & TheJudge310 . As you can see having 50% or more light go through isn’t too bad, but is definitely helpful.

For example, if you mount a 5% film to a glass window with 80% VLT tint, it will equal 4%. So, the glass and shade will have a collective VLT of 4%. In the case where you’re not sure of the VLT percentage of your existing window tint, you can always refer to a professional. Thirty-five Percent Window Tinting – Max Legal Tint In Certain Areas. 35% Window Tint. Michigan and Indiana are two states that cap the legal window tint at 35%, meaning just 35% of the light is allowed. This is a noticeably dark tint on a vehicle.

Twenty percent window shade tint is also called "Factory Tint". Windows tinted at the time the car was manufactured usually have a shade of 15% - 26%. Five (5) Percent Tint. Five percent shade is also called "Limo Tint". This shade only allows in 5% of the available light. Auto One locations may offer different shades. The window tinting visual guide is a mock-up only.

Window tint percentage examples 50%. The films may be clear, but it can still block heat and uv rays. For example, 5 % would be a very dark tint. For all car windows (with the exception of your windshield), you can’t tint your windows with anything less than 35% vlt tint. Whatever the VLT level of a tint is, that’s the percentage of light that’s allowed through the tint. For example, 5% tint only allows 5% of light to pass through while 35% tint allows 35% of light to pass through. While VLT isn’t the only thing you need to consider if you want the best tint.

The tint percentage represents the amount of visible light that can pass through the tinted window. So, if your window tint is 5%, it only allows 5% of light to come through and will, therefore, be a very dark tint. If it is 80%, it will be significantly lighter and will allow. In the US, the tinting laws vary from state to state defined by the Department of Motor Vehicles in each location. Taking the state of California for example, the rules permit the tinting of the front passenger window only up to 70%. This means that these windows should allow a minimum of 70% visible light through them.

The higher the given percentage, the more light is allowed to get through a tinted window; that amount of light is called visible light transmission, or VLT. A tint with 25% VLT transmits 25% of the visible light while a film with 90% VLT blocks 10% of it. In the US, the tinting laws vary from state to state defined by the Department of Motor Vehicles in each location. Taking the state of California for example, the rules permit the tinting of the front passenger window only up to 70%. This means that these windows should allow a minimum of 70% visible light through them.

One thing to keep in mind while picking out your level of tint is to consider the Florida law. Your front side windows should not be more than 28%. The backside and rear windows must allow more than 15% of the light in. How Do You Choose? Vehicle window tints come in four standard percentage options — 50 percent, 35 percent, 20 percent, and 5 percent. Fifty percentage blockage is a standard option for most owners. This falls within the limits of most state laws and is a good option to protect against the sun’s rays.