-->
Skip to content Skip to sidebar Skip to footer

Car WINDOW TINTING Laws South Australia

Car Window Tinting Laws South Australia. In South Australia (SA) windshields may only have a tinted strip on top, equaling to either 10% of total windshield area, or the portion of the windshield above the reach of windshield wipers, whichever is greater. Windscreen must have at least 70% light transmission (factory made), but aftermarket modifications are not allowed.

Car Auto Window Tinting Laws In South Australia
Car Auto Window Tinting Laws In South Australia
NEW WINDOW TINTING LAWS FOR SA MOTORISTS. New laws regarding car window tinting will come into effect in South Australia on January 1 next year. Road Safety Minister, Michael O’Brien says the changes will bring South Australia into line with window tinting laws in the other states. “The lack of window tinting uniformity has caused a lot of confusion, both in the industry and with car owners who’ve moved here from interstate,” Mr O’Brien said.

Australia window tint laws are different in certain territories and states. This article provides all relevant information about window tinting laws in South Australia (SA). South Australia Window Tint Laws. Windshield: Only uppermost 10% of windshield may be tinted. The standards for window tinting are specified in the South Australian Road Traffic (Light Vehicle Standards) Rules 2018 and apply to vehicles operating in South Australia. Vehicles that do not comply with the standards place the driver, owner and operator at risk of committing an offence.

South Australia Window Tint Laws. Windshield: Only uppermost 10% of windshield may be tinted. Front side windows: Must have more than 35% VLT. Back side windows: Must have more than 20% VLT. Rear window: Must have more than 20% VLT. More South Australia tint laws » Tasmania Window Tint Laws. Windshield: Only uppermost 10% of windshield may be tinted.

South Australia Window Tint Laws Car Tinting Laws. Front windscreen may have 70% VLT in case vehicle was manufactured before 1971. Interior car windows must have over 70% light transmission. “Goods vehicles” such as panel vans can have any tint level on windows behind driver. The windows behind the driver’s seat must have a luminous transmittance of at least 35% unless they are interior windows. The driver and front passenger windows must have a luminous transmittance of at least 35%. Window tinting on vehicles. Vehicle Standards - Light vehicle fact sheet.

Lengthening or shortening a vehicle body is acceptable provided an engineer's report prepared by a Chartered Professional Engineer (438.4 KB PDF) is presented, certifying that the modified vehicle:. continues to comply with all applicable Australian Design Rules; meets the requirements of Fact Sheet MR132 - Brake System Test Procedure (64.4 KB PDF).

However, all window tinting, be it dye-type or film-type, regardless of where you live in Australia, cannot be more than 10% reflective. The basic window tinting rules for Australia are (as of June 2018) for rear windows (B-pillar back): 35% VLT – Victoria and Tasmania have the strictest tinting regulations. Window tint also adds a layer of security making it harder for criminals to peer inside your car at night. Tinting Laws in South Australia In South Australia, you are required to have a minimum of 35% VLT for all front side windows and at least 20% VLT for back, side and rear windows.

All states of Australia require a minimum VLT limit of 35% for the front drivers and passengers window, that simply means that a minimum of 35% of light must pass through the glass after the film is installed. Laws regarding the remainder of the glass behind the driver does vary depending on the type of vehicle, and the state that the vehicle is registered in.

Window tint laws darken up South Australian car owners now have greater flexibility when tinting their car windows. In February 2018, the South Australian government relaxed regulations regarding the darkness of the windows behind the driver in a passenger vehicle. These can now be tinted by professionals to 20% visible light transmission.